The Metallurgy Microscope NMM-100 is designed to meet the performance demands of the metal and alloy engineering industry. Equipped with a high-quality infinite far beam system. The unit has a coarse and micro-motion coaxial focusing system. It features a falling and transmission illumination system, an infinite long-distance flat field achromatic objective lens, and a built-in polarizing observation device.

Thumb

Avatar

0 repins 0 comments

Melt Flow Indexer NMFI-101 is used to determine the melt mass flow rate/ease of flow of plastics in a viscous state. Adhering to ASTM D1238 and ISO 1133, it features a dual temperature control system for more accuracy and heating efficiency. It helps measure various plastics and resins including polyethylene, polystyrene, polypropylene, ABS resin, polyoxymethylene, polycarbonate resins, etc. It is one of the most popular devices in the plastic industry and is often used to test batch-to-batch consistency.

Thumb

Avatar

0 repins 0 comments

Multi-Tube Vortex Mixer NMVM-100 is a high-capacity vortex mixer designed with brushless DC motor to provide gentle to vigorous mixing of reagents up to 50 test tubes in a single run thereby making the experiment efficient and quick. Vortexing action is created by securing the top of the vessel in place while allowing the bottom to move freely in a defined orbit. It is microprocessor-controlled and a maintenance free motor with quiet operation offers added advantage.

Thumb

Avatar

0 repins 0 comments

Multi-Position Hotplate Magnetic Stirrer NMHS-100 is designed with a motor driven multiple stirring pans that individually enables to perform various heating procedures like digestion, evaporation and dissolution etc. It is equipped with temperature sensors made up of platinum to effectively monitor temperature fluctuations and Polytetrafluoroethylene (PTFE) stirring bar with non-wetting, high density and high temperature resistant properties. The work plate is made up of ceramic top coat that prevents it from chemical corrosion.

Thumb

Avatar

0 repins 0 comments

Multi-gas analyzer NMA-230 is a portable multi-gas detector designed for measurement, analysis, monitoring and control of gas output. Equipped with four gas detector sensors for oxygen, combustibles, hydrogen sulfide and carbon monoxide. Built-in, high-power carbon film with self-priming pump with quick response facilitates easy sampling of gases present at lower atmospheric pressure. The Acrylonitrile – Butadiene- Styrene body shell is dust-proof, explosion-proof and water-proof and durable at low temperatures.

Thumb

Avatar

0 repins 0 comments

Benchtop Vortex Mixer NBVM-101 is a highly efficient research laboratory apparatus that mixes various liquid samples rapidly through oscillating circular motions. As the motor runs, the rubber cap oscillates rapidly in a circular motion and a vortex is created. It is a compact model which allows gentle mixing of samples producing low noise levels.

Thumb

Avatar

0 repins 0 comments

Microwave Digestion System NMDS-100 is an instrument used in sample preparation for superior trace elemental analysis. Equipped with advanced double magnetron frequency microwave heating system, it prepares samples in less time than traditional methods and is therefore an instrument of choice for sample preparation. It also saves on usage of acid required for sample digestion and also retains the volatile elements. This instrument is used in labs for accurate sample analysis and quick results.

Thumb

Avatar

0 repins 0 comments

Metal Detector NMD-100 is a high-sensitivity device designed for analyzing metal compounds. With five detection modes, including Zero, Jewelry, Custom, Relics, and Coins, users can easily select their preferred setting on the LCD screen. The detector supports one-touch operation, convenient storage, an adjustable arm cuff, and a quarter-inch headphone jack. This user-friendly and flexible nature of the product makes it most sought after product.

Thumb

Avatar

0 repins 0 comments

Multitest analyzer NMTA-100 is a tabletop unit with quality control for normal and abnormal values, automatic statistics and analysis of control data. Features built-in thermal printer for permanent printing by thermal wax transfer. Provision for Multilanguage feature makes it user-friendly.

Thumb

Avatar

0 repins 0 comments

The Muffle Furnace NMF-201 is an automatically controlled P.I.D. device that uses a silicon-controlled rectifier. Designed with cutting-edge features like precise temperature control, it has an operating temperature of 1300 oC and a heating rate of 15 oC/min. The furnace lining is made of high-purity alumina polymer material for low heat storage, heat preservation, and energy savings. Equipped with stable and reliable technology.

Thumb

Avatar

0 repins 0 comments

Mini Electrophoresis System NMES-100 is a compact, mini gel horizontal electrophoresis system that is designed for quick and easy separation of DNA or nucleic acids. It is an assembly with a high retaining capacity buffer tank with a leakproof feature that ensures stable pH and temperature throughout the resolution of a gel. It is equipped with a transparent safety lid that prevents volatilization of buffer and electricity leakage as well as window for viewing above the gel. Such compact model is ideal for personal use, small laboratories or the classroom.

Thumb

Avatar

0 repins 0 comments

Microvolume Spectrophotometer NMVS-100, also referred to as low volume, small volume or nano-spectrophotometer, is a fast and reliable instrument designed for measurement of a sample concentration speedily in less than 5 seconds. The model features small footprint and touchscreen control for easy laboratory setup with minimal investment of time, cost, and effort. The built-in micro-volume sample port allows for working with sample volumes as little as 1-2µL. One-swipe cleaning streamlines allows you to quickly move from sample to sample resulting in better workflow.

Thumb

Avatar

0 repins 0 comments

Automatic melting point meter NMPM-100 is a tabletop analytical apparatus that enables determination of melting point of chemical substance. It is featured with large TFT touch screen for accessible setting of operational parameters. It provides RS32 interface for data transmission and storage, aiding identification of chemical compounds.

Thumb

Avatar

0 repins 0 comments

Liquid Particle Counter NLPR-100 is capable of detecting particles across a wide range of sizes, typically from 0.8μm to 600μm with 0.2 to 1000mL of sample volume. Our counter works on the principle of the photo-resistive method and utilizes a semiconductor laser as a light source. It Features a built-in pressure sensor, to set pressure values and assess cabin air pressure, ensuring operational safety to users. It is compatible with various industry requirements using different testing cups.

Thumb

Avatar

0 repins 0 comments

Light Booth NLB-100 is a color assessment cabinet that enables proofing color of finished products in various light sources that mimics the environmental conditions. It is ergonomically designed six lamp variant cabinet with respective lamp keys arranged in unidirectional arrangement for simple user operation procedure.

Thumb

Avatar

0 repins 0 comments

Lux Meter NLXM-200 is a handheld unit designed for measurement of luminosity and brightness in Lux. It is equipped with probe integrated with host in unit and separate light sensor for optimum position readings. Measurement ranges into 3 grades X1, X10 and X100 with LCD display assures accurate reading without any manual error. It also shows resolution and range in foot candle (FC) unit. It is used for laboratories as well as on-field measurement of light and luminosity.

Thumb

Avatar

0 repins 0 comments

Liquid Nitrogen Dewar NLND-100 is durable, lightweight aluminium alloy cryogenic container with multi-layer thermal insulation that helps store and dispense small amounts of liquid nitrogen. It features lockable lid that provides protection and sample isolation. Equipped with rack and box system, it helps in efficient sample retrieval simple and consumes minimum liquid nitrogen. These containers are ideal for transporting biological samples at cryogenic temperature while preserving sample integrity.

Thumb

Avatar

0 repins 0 comments

Leaf area meter NLAM-100 is a hand-held leaf area measuring instrument that can measure the leaf area and other parameter of leaf such as area, circumference, length, width, aspect ratio, and shape factor, in real time, accurately, quickly, and without damage. It can also measure the area of picked plant leaves and other sheet objects

Thumb

Avatar

0 repins 0 comments

Laser Particle Counter NLPC-200 is a device used to measure the cummulative and differential size distribution of dust particles per unit volume in clean environment. Using the laser diode, the instrument measures the light that is redirected or absorbed by the particle. A highly accurate built-in sensor displays the measurement on a well-lit LCD display along with temperature and humidity readings.

Thumb

Avatar

0 repins 0 comments

Laboratory Homogenizer Mixer NLHM-100 is a powerful, heavy-duty equipment used to rapidly homogenize, disperse and disintegrate low to medium and high viscosity liquids to distribute particles evenly. Equipped with different rotors, it helps process samples up to 13 litres. With high speed, it rapidly processes the sample preparation of biological samples using mechanical shearing.

Thumb

Avatar

0 repins 0 comments

Low-Speed Centrifuge NLSC-100 is a tabletop centrifuge with the memory of rotational programs that helps with precise separation of biological components, effective washing of cells or chemical precipitates. The microprocessor-controlled system overcomes the adverse conditions like over speed and imbalanced rotor by automatically reducing rotation speed levels. It is featured with an electronic lid lock that ensures the safety of the equipment as well as of the user.

Thumb

Avatar

0 repins 0 comments

Laser Distance Meter NLADM-100 is a handheld meter improved with laser technology to provide a quick, accurate, and efficient way to measure distances in various applications, offering convenience and reliability to users. It accommodates measuring range from 40 to 120 m to measure distances accurately. Our laser distance meters are powered by batteries, offering convenience and flexibility in usage.

Thumb

Avatar

0 repins 0 comments

Kinematic Viscometer NKV-100 is an analytical instrument that helps determine the kinematic viscosity i.e., it measures the internal friction force when the liquid flows under the action of gravity of liquid petroleum products. Equipped with PID-controller and imported sensor, it offers a wide temperature-control range and high temperature-control precision. This instrument is used for research, development and quality control practices without any user intervention.

Thumb

Avatar

0 repins 0 comments

Inverted Fluorescence Microscope NIFM-100 is an advanced microscope furnished with Phase contrast and Infinity plan achromatic optical system that allows microscopic examination of the cell culture samples. It is equipped with high resolution camera and compatible software that aids in capturing high resolution images.

Thumb

Avatar

0 repins 0 comments

Floor-type Incubator Shaker NFIS-100 is a temperature-controlled chamber that involves even and continuous agitation of sample media to cultivate various microbial cultures. Designed with brushless DC motor, it ensures gentle mixing and promote cell growth and cell aeration of the media. Such incubators are an essential part of life science studies and are often used for cell culturing, cell aeration, and solubility studies among other uses.

Thumb

Avatar

0 repins 0 comments

Infrared Digestion Furnace NIDF-100 is a compact, double-shell aluminium digestion unit employed for Kjeldahl digestion of a wide variety of samples with nitrogen content in the micro and macro range. Adopting infrared technology, it results in rapid heating and cooling of sample which saves on digestion time and ensures high sample throughput. More than 90% of protein-containing samples and over 60% of all Nitrogen-containing samples can be processed using this digestion unit.

Thumb

Avatar

0 repins 0 comments

Benchtop Incubator Shaker NBIS-100 is a temperature-controlled chamber that involves even and continuous agitation of sample media to cultivate various microbial cultures. Designed with brushless DC motor, it ensures gentle mixing and promote cell growth and cell aeration of the media. Such incubators are an essential part of life science studies and are often used for cell culturing, cell aeration, and solubility studies among other uses.

Thumb

Avatar

0 repins 0 comments

IR Carbon and Sulphur Analyzer NCSA-103 is a high frequency analytical unit that determines both low and high carbon and sulfur concentrations with minimal sample preparation. It offers user-friendly software, durability and maintenance to ensure precsie measurements and shortened cycle time of 20-60 seconds. High-speed 32-bit sampling chip and both ultra-low and higher content analysis improves sensitivity and provides a high precision rate.

Thumb

Avatar

0 repins 0 comments

Industrial Circulation Chiller NICC-101 is air-cooled chilling absorb heat from process water, which is then transferred to the air present around the chiller unit. Equipped with one of the best compressors, it guarantees precise and high-quality thermoregulation for industrial processes. It is an ideal equipment when dealing with critical applications that require large-batch process cooling and steady, reliable operation with a dependable investment.

Thumb

Avatar

0 repins 0 comments

The NAC-100 anaerobic chamber is perfect for laboratories where the growth and identification of bacteria need the absence of oxygen. The incubator is designed with a double widen door in a way that it can put more petri dishes. The product is equipped with leakage protection.

Thumb

Avatar

0 repins 0 comments

Next Page