pocket salinity tester pocket salinity tester has a one to three point calibration method. With its platinum sensor, it delivers accurate and timely readings. Five settings can be set using the System menu. It gauges the salinity of concentrated solutions with low and high salt contents as well as water. Equipped with a changeable electrode lowers the cost of maintenance.Salinity measurement range-0.00 to 10.00 ppt;Salinity accuracy-± 1 % F.S;Normalization temperature-25 °C; for more visit labtron.us

Thumb

0 repins 0 comments

Platelet Shaker Platelet Shaker is made of high-grade steel which has stainless steel trays for durability and ease of cleaning. It has several trays to hold twelve platelet bags, quiet operation, and little maintenance. shakers for platelets made especially to satisfy the needs of different kinds of clinical laboratories.Shaking Speed Range-0 to 9 rpm;Capacity-12 bags;Overall Dimension 370 x 255 x 390 mm for more visit labtron.us

Thumb

0 repins 0 comments

Plasma Extractor The Plasma Extractor is used to remove blood components from blood bags. Because of its sturdy construction, it requires little maintenance and is a manual system that runs without power. Blood banks, hospitals, and research facilities use it extensively.Clamping Force-20 N;Separates-Plasma;Applicable Blood Bag 100 ml, 200 ml, 300 ml, 400 ml for more visit labtron.us

Thumb

0 repins 0 comments

Platelet Agitator Platelet Agitator is an open continuous side-to-side motion agitation system with storage capacity up to 30 apheresis bags. the shelves are made of stainless steel, sliding, mounting, and unmounting them is simple. Shelf platforms with specialized motor assemblies can generate smooth strokes, which lessen noise and squeaks. To maintain RTP conditions, one-piece perforated drawers with a non-slip textured finish distribute heat and offer consistent air circulation. Shelf platforms-5 shelves;Stroke speed-60 strokes/ min;Mobility-Castor wheels for more visit labtron.us

Thumb

0 repins 0 comments

Pipette Controller Pipette Controller is compatible with Pasteur, glass, and plastic pipettes with volumes ranging from 0.1 to 100 ml. It has a powerful pump, eight speeds to choose from for both aspiration and dispensing. It has silicon adapter for pipettes, LCD display, speed setting button, and premium Li-on battery,Dispensing speed-Motor/gravity;Dispensing speed-8 shifts;Pipette volume-0.1 to 100 ml;for more visit labtron.us

Thumb

0 repins 0 comments

Plasma Autoclave Plasma Autoclave is a vertical single cycle sterilizing unit with 80 liter capacity. equipped with a minimum of three sterilization programs and an H2O2 purifying device. Eliminating the need for operator intervention is made possible by real-time sterilization process monitoring, automatic system failure recognition, and cycle-ending unlocking.Capacity-80 L;Sterilizing agent-60 % H2O2;Sealing time-Up to 0.5 seconds;Chamber size-450 × 312 × 670 mm for more visit labtrn.us

Thumb

0 repins 0 comments

Pharmacy Refrigerator The Pharmacy Refrigerator is a digital microprocessor controlled temperature refrigerator. complete automatic defrost system with thermostat and digital thermometer integrated in.Temperatre Range-0 °C to 15 °C;Number of Wire shelves-4;Net volume-260 L;Gross Volume-300 L for more visit labtron.us

Thumb

0 repins 0 comments

A pipette pump is plastic tubes used to measure and transfer small volumes of liquid. pipette pumps contribute to the accuracy and reliability of laboratory experiments by providing a controlled and efficient means of handling small liquid volumes.Capacity-10 mL;Packagin-Bulk Packing;Quantity Per Case-100 for more visit labtron.us

Thumb

0 repins 0 comments

Plant Growth Chamber Plant Growth Chamber is used to precisely analyze or mimic various climatic conditions. It provides a temperature range of 0 to 50°C without illumination, 10 to 50°C with lighting, intended to be easily cleaned, including a double-walled, highly insulated stainless steel inner chamber with semi-circular arcs at the corners.Chamber Volume-300 L;Shelves-3(PCS);Display Resolution-0.1 ℃;Humidity Range-50 to 90 % RH for more visit labtron.us

Thumb

0 repins 0 comments

The Test Methods for Demulsibility Characteristics of Petroleum Oils and Synthetic Fluids is followed in the design and construction of the tester.It helps in Effective separation of oil and water is important for maintaining the performance and longevity of the fluid and the machinery it serves.Relative humidity-≤ 85 %;Timing range-1 s to 9 min 59 s;Stirring speed-1500 ± 15 rpm;Total power consumption-≤ 800 W for more visit labton.us

Thumb

0 repins 0 comments

A Petroleum Products Vapor Pressure Tester is a device used to measure the vapor pressure of petroleum products. Vapor pressure is the pressure exerted by the vapor phase of a substance when it is in equilibrium with its liquid phase at a given temperature.Tester typically works by creating a controlled environment in which a sample of the petroleum product can evaporate, and the resulting vapor pressure is measured and recorded. Temperature range=- 40 ℃ to 300 ℃;Top opening dimensions-310 x 280 mm;Display resolution-0.001;Digital resolution-0.01 ℃ , 0.001℃ for more visit labtron.us

Thumb

0 repins 0 comments

Penetrometer The Penetrometer is a six-grade softening device that measures the bituminous mixture's needle penetration and the lubricating grease's cone penetration with a control time. It has a digital display that indicates the sample's penetration number Measrement range-600 penetration scale;Time accuracy-± 0.1 seconds;Penetration accuracy-± 1 penetration for more visit labtron.us

Thumb

0 repins 0 comments

Polymerase Chain Reaction (PCR) cabinet Polymerase Chain Reaction (PCR) cabinet features a slide glass window maximizing light and visibility for the workstation. Equipped with a washable pre filter and 0.3 µm HEPA filter with a speed adjustable airflow velocity ranging from 0.3 m/s to 0.5 m/s. Manual front and side anti-UV window enclosure with an opening of 320 mm ensures user protection. Built-in preset 90 mins UV timer automatically switches off post 90 mins in preparation for next experiment for more visit labtron.us

Thumb

0 repins 0 comments

Pathology Workstation The floor-standing Pathology Workstation has plenty of workspace . It has a UV lamp, a fluorescent lamp, an exhaust system, an auto flushing mechanism, a stainless steel hanger, a funnel with a filter, and a cold and hot water tap. It is extensively utilized in labs, medical facilities, and research centers.External Dimension (W×D×H) 1000 × 750 × 1950 mm; Work Surface Height-900 mm for more visit labtron.us

Thumb

0 repins 0 comments

Polymerase Chain Reaction (PCR) System The Polymerase Chain Reaction (PCR) System is composed of a long-lasting peltier heating unit with front and back air channels allowing side-by-side machine arrangement. The hot lid is designed with stepless adjustment and pressure protection to accommodate tubes with varying heights.Capacity-96 × 0.2 ml;Tube-0.2 ml tube, 8 strips, 96 wells plate;Max.Ramp Rate-0.7°C/s for more visit labtron.us

Thumb

0 repins 0 comments

Paraffin Trimmer The Paraffin Trimmer is used to remove extra paraffin from tissue cassettes that are being embedded. The trash collecting box that is attached is used to collect melted paraffin. cuts several blocks at once. features a surface with grooves to allow for optimal wax drainage. It's perfect for taking out extra paraffin from cassettes in histology, medicinal, and research labs.Temperature range-RT to 90 °C;Temperature accuracy-± 1 °C;Working area 230 mm × 160 mm;Power consumption-150 W for more visit labtron .us

Thumb

0 repins 0 comments

Paper and cardboard thickness meter Paper and cardboard thickness meter Use a contact measurement technique, the TP-E20 gauges paper thickness for corrugated materials. A false weight is used to mount the analog (pointer type) gauge display at the top in order to create a consistent, uniform pressure on the anvil through the foot. It is used in the packaging, paper, and printing industries.Measuring range-0 to 4 mm;Accuracy-0.01 or 0.001 mm;Gauge-Analogue gauge display;Contact diameter-16.0 ± 0.5 mm for more visit labtron.us

Thumb

0 repins 0 comments

Paper Tearing Tester Paper Tearing Tester is a sophisticated device designed to evaluate the tearing strength of paper and paperboard. To accurately detect paper material and conduct the tearing test, this tearing tester has a 104 mm long tearing arm and a 43 ± 0.5 mm tearing distance.Measuring range-0 to 1000 mN;Resolution-0.1 mN;Tearing arm-104 ± 1 mm;Tearing angle-27.5° ± 0.5°;Tearing distance-43 ± 0.5 mm for more visit labtron.us

Thumb

0 repins 0 comments

The Paper air permeability tester is used to measure air permeability in terms of time and unit pressure differential under specific conditions. It calculates the mean airflow through the sheets per unit area.It incorporates the conventional "Paper porosity method," which is used to measure the permeability of paper.Measuring range 0 to 1000 ml/min;Test area-10 ± 0.02 cm2; Area differential pressure-1 ± 0.01 kPa; Inner diameter of grip rin-35.68 ± 0.05 mm;Dimension 410×300×1160 mm;Weight-About 15kg; for more visit labtron.us

Thumb

0 repins 0 comments