ICI pilling and snagging tester The cube rolling box type pilling test method is the most common, with cork gaskets and polyurethane tubes, it can complete the tests of ISO 12945.1, GB/T 4802.3 and other standards. If the hook nails are implanted on the six sides of the rolling box, the JIS standard and some buyer's test methods can also be completed. http://gellowen.co.uk/News/442.html

Thumb

Avatar

0 repins 0 comments

Heat Transmission Resistant Tester The tester mainly used for the determination of textiles, fire supplies and other materials thermal conductivity. http://www.qinsun-tester.com/Protective-clothing/286.html

Thumb

Avatar

0 repins 1 comments

Accelerate heat stress and other phenomena, and cause cardiovascular system and nervous system diseases in severe cases.Sweating Thermal ManikinIn related technologies, such as medium sweating dummy system, body model thermal dummy system, thermal dummy system, etc., although it can simulate human body metabolic heat production and can collect and control parameters such as dummy temperature and sweating amount , but it can only be used passively to study the heat exchange between the human body-clothing-environment, the measurement of clothing thermo-humidity performance, heat transfer coefficient, etc. It should be noted that the thermophysiological response of the human body is affected by the parameters of the human body-clothing-environment. The existing dummy system can simulate the heat produced by the human body and measure the heat exchange between the human body and the environment, but it does not have the thermophysiological regulation function of the human body and cannot Like humans, they can sense changes in the environment and make active adjustments. Therefore, the existing dummy system cannot solve the thermophysiological changes of the human body under the working condition of wearing protective clothing. https://www.qinsun-lab.com/News-and-events/1998.html

Thumb

Avatar

0 repins 1 comments

Flame Retardant Combustion Performance Tester

Thumb

Avatar

0 repins 1 comments

Sweating Thermal Manikin can reflect the factors that affect the heat exchange between the human body and the environment, these factors include: ① The surface area of the human body covered by fabric and the surface area of exposed skin;②The distribution of the clothing layer and the air layer on the surface of the human body (that is, non-uniformity);③ Tightness;④ Due to the increase of the heat dissipation area after the human body is dressed (that is, the clothing area coefficient);⑤ Influence of product design;⑥Changes in clothing characteristics (zippers are opened, headscarves are worn, etc.);⑦ Differences in temperature (and heat dissipation) of different parts of the human body;⑧The impact of human body posture (such as standing, sitting, lying down);⑨The impact of human activities (such as walking, cycling);⑩The Sweating Thermal Manikin test can reflect the real situation, because such a test can quantitatively describe the impact of the clothing system on the heat exchange between the entire human body and the environment.comfortable-thermal-manikinSweating Thermal Manikin will continue to be used to measure the thermal resistance and evaporative impedance of protective clothing systems. A useful tool in the development of protective clothing systems, Sweating Thermal Manikin can be used to evaluate protective clothing under steady state and transient conditions, as well as to predict wearer comfort (or thermal stress). Although the Sweating Thermal Manikin is easy to use, dummies, artificial climate chambers, computer control and data acquisition systems are expensive and complex to maintain, the Sweating Thermal Manikin is an important piece of equipment for protective clothing evaluation research and its research, development and application are of great practical importance. It is believed that with the cooperation of all relevant research institutions, the Sweating Thermal Manikin testing technology will be further developed in the near future. It is of great significance to evaluate the comfort and performance of protective clothing systems. More and more standard test methods use a life-sized Sweating Thermal Manikin to test the performance of protective clothing systems. Walter Sweating Fabric Manikin was used to evaluate the fire resistance and airtightness of different types of protective clothing.

Thumb

Avatar

0 repins 1 comments

Testing Standards:ASTM D7142-2/F963, CFR 1500, EN 71 PART 1, GB 6675, ISO 8124, M&S P115AApplications:Snap Tester is used to evaluate the fixed stength of fastners and buttons as well as garment accessories. In the designing and manufacturing of baby and children’s clothing, the detachment of fastners off the garment will cause childern in danger of choking.The test project qualifies the garment manufacturer to ensure that buttons, fastners and other accessories can be properly attached to the garment. Snap Button Tester – QINSUN (qinsun-lab.com)https://www.qinsun-lab.com/71.html

Thumb

Avatar

0 repins 1 comments

Let us understand the following matters that need to be noted when the button pull tester is conducting the test. 1, should choose to install in clean, dry, vibration-free and room temperature can be controlled in the (10 ~ 35) ℃ room. And the room should have enough space to ensure that there is more than 70cm of space around the tester for testing and daily maintenance. 2, the installation location will be down to dig a pit, the size than the base of the test machine is longer and wider than 50cm each, the depth is not less than 30cm. https://www.standard-groups.com/en/TextileGarment/710.html

Thumb

Avatar

0 repins 0 comments

Mask inhalation and exhalation resistance tester https://www.qinsun-lab.com/News-and-events/1989.html

Thumb

Avatar

0 repins 1 comments

Vertical method fabric flame retardant performance tester features. 1、Resistance wire ignition. 2、With three kinds of burners and variable size combustion box can be used according to different test options. 3、The burner is automatically timed and positioned. 4、The ignition time can be set from 0 to 99.99 seconds, and the renewal time and flame retardant time are automatically recorded and digitally displayed. 5、Flame height can be adjusted, and can be equipped with flame temperature measuring device. 6、"Push-pull" type sample frame fixing device https://www.testerinlab.com/news/682.html

Thumb

Avatar

0 repins 1 comments

10kN Universal Testing Machine https://www.standard-groups.com/en/TextileGarment/1293.html#m

Thumb

Avatar

0 repins 0 comments

UV Accelerated Weathering Tester & Xenon lamp aging test Chambers -QINSUN https://www.qinsun-lab.com/aging-tester/index.html

Thumb

Avatar

0 repins 4 comments

QINSUN ICI Pilling and Snagging Tester is used with the following precautions:1、Stable voltage should be maintained during use to avoid burning out the power supply.2、Clean the cork liner regularly with a suitable cleaning solvent, such as industrial methylated spirit or triamcinolone. https://www.qinsun-lab.com/News-and-events/1983.html

Thumb

Avatar

0 repins 2 comments

There are two commonly used xenon lamp aging testers, one is the air-cooled xenon lamp aging test chamber, its structure is to irradiate from the top to the bottom, and the sample is placed on the slope below, and the other is the drum type structure, the xenon lamp tube is located In the middle of the drum, the sample is placed on the drum wheel. Atlas xenon lamp aging test chamber Comparison of test data of water-cooled xenon lamp aging tester with natural aging data: https://www.standard-groups.com/en/News/666.html#m

Thumb

Avatar

0 repins 0 comments

FR-3261 Mask Breathing Resistance Tester https://www.testerinlab.com/news/681.html

Thumb

Avatar

0 repins 0 comments

UV-880 Ultraviolet Aging Tester 1. Standardize the site and location of UV Aging Test Chamber equipment: the test equipment has certain requirements for the site, not only for the size of the site, but also for the temperature and humidity, which should meet certain conditions. There are no flammable, explosive and other dangerous goods that are likely to cause fire in the site. When the site meets the requirements, there are also requirements for the location of the equipment, because the equipment will have heat dissipation during operation, Therefore, there should be no objects around the equipment as far as possible to avoid affecting the test effect. In addition, there should be emergency disposal configurations such as fire fighting around the site to avoid more serious consequences caused by unexpected accidents.UV-880 Ultraviolet Aging Tester.jpg2. Pay attention to the relevant parameters of the UV Aging Test Chamber equipment: Now the equipment has multiple control systems, and the parameters of different systems are inconsistent. When setting the relevant parameters, make sure they meet the corresponding standards. https://www.qinsun-lab.com/News-and-events/1982.html

Thumb

Avatar

0 repins 0 comments

UV Aging Chamber The UV Aging Chamber uses fluorescent UV lamps as the light source to accelerate the weathering test by simulating the UV radiation and condensation in the natural sunlight, which can quickly and accurately obtain the results of material weathering. https://www.standard-groups.com/en/News/664.html

Thumb

Avatar

0 repins 0 comments

Walter Sweating Fabric Manikin Adaptation standard: -Nordic standards (eg INSTA 352-355) -European standards (e.g. EN-511 2005, EN-13537 2002) -American standards (such as ASTM-F1291 2005 and ASTM-F1720 1996) -International standards (e.g. ISO-15831 2003) Features 1. Purple dolphin model with good thermal conductivity. 2. Dark treatment with the same skin radiation value as humans . Perfect simulation of human skin; 3.The modular manikin structure, easy to dismantle. Achieving the scene assembly measurement in the narrow space. 4. 11 independent control heating sections with high precision. 5. Heat insulation capacity in each independent heating section. Achieve special test requirements of the human body temperature difference. And the temperature difference up to 3 ℃ in the adjacent section. Easy to disassemble and install due to the 6 detachable joints. 6. Head cable drawing-off way is easy for clothing wear off. https://www.qinsun-lab.com/1464.html

Thumb

Avatar

0 repins 0 comments