Labtron Graphite Kjeldahl Digester uses infrared heating with graphite conduction. It processes 20 tubes of 300 ml with PID temperature control from 5–450 °C. A color screen, insulation, anticorrosive pump, and safety protection support smooth operation.

Thumb

0 repins 0 comments

Labtron Blood Bag Tube Sealer is a compact unit for sealing blood, infusion, and urine bags using a high-frequency sealing system. It supports tube diameters from 3 to 6 mm with a sealing time of 0.5 to 2 seconds. Uniform heating ensures firm, clean sealing while maintaining blood quality.

Thumb

0 repins 0 comments

Labtron ducted fume hood is microprocessor-controlled with a centrifugal blower to remove toxic gases. It features an 820×670×730 mm interior, 520 mm opening, 850 mm work height, 0.3–0.8 m/s airflow, LED and 253.7 nm UV lamps, acid- and base-resistant surfaces, and an active carbon filter.

Thumb

0 repins 0 comments

Labtron oil and grease analyzer is a tabletop unit with a dismountable optical system and electrical modulation source. It measures 0.001–2000 mg/L using an integrated optical and electrical setup. Built-in storage, auto reset, and regression calculation simplfies the analysis.

Thumb

0 repins 0 comments

Labtron Flow Cytometer Analyzes physical and chemical cell characteristics using dual semiconductor lasers at 488 nm and 638 nm. An avalanche photodiode detector improves sensitivity and resolution across fluorescence channels. An integrated sampling pump supports accurate cytometric measurements.

Thumb

0 repins 0 comments

Labtron Automated Media Dispensing system includes a main control unit, rotor, and carrousel holding up to 94 petri dishes. It supports 1 to 99 ml dispensing with fast calibration, stored programs, and high dispensing speed. A 5.7-inch touch screen enables simple operation.

Thumb

0 repins 0 comments

Labtron Multi-Mode Microplate Reader Supports 6 to 384-well plates for absorbance, fluorescence, and luminescence detection. It features a xenon lamp, RT+4 °C to 45 °C temperature control, fast reading, and wide dynamic range. Suitable for medical, biological, and pharmaceutical research applications.

Thumb

0 repins 0 comments

Labtron Fat Analyzer operates on the Soxhlet extraction principle for automated fat determination. It processes up to six samples per batch with a capacity of 0.5 to 15 g. The metal heating module enables rapid heating with low power consumption, while ether leak detection with water control ensures safe operation.

Thumb

0 repins 0 comments

LabtronDigital Burette offers a volume range of 0.01 mL to 99.99 mL, supporting accurate dispensing for both small and large titrations. A high-quality motor and electronic control enable smooth, fatigue-free operation. The built-in magnetic stirrer ensures uniform mixing directly from reagent bottles.

Thumb

0 repins 0 comments

Labtron Air Sterilizer provides a PM2.5 CADR of 500 m³/h for efficient indoor air purification. It combines an H13 HEPA filter with activated carbon to reduce fine particles, odors, and VOCs. Copper-silver ion framework with UVC support helps limit airborne microorganisms.

Thumb

0 repins 0 comments

Labtron handheld XRF spectrometer applies energy dispersive X-ray fluorescence to detect elements from magnesium to uranium. It analyzes up to 40 elements with ppm to 99.99% range and fast results. The unit includes a 5-inch touchscreen, Bluetooth, GPS, and rechargeable battery for field analysis.

Thumb

0 repins 0 comments

Labtron manual colony counter supports colony counts from 0 to 999 and petri dishes from 50 to 150 mm. It features 3–9× magnification, LED white light, and a 3-digit digital display. A pressure-sensitive pen enables cumulative marking and dual dish counting.

Thumb

0 repins 0 comments

Labtron standard analytical balance delivers accurate weighing with 100 g / 600 g capacity, 0.001 g / 0.01 g resolution, and 0.004 g / 0.04 g minimum weighing. It features a load cell sensor, ≤3 s stabilization, LCD display, 110 mm pan, and sliding glass draft shield for stable measurements.

Thumb

0 repins 0 comments

Labtron portable drug detector enables rapid on-site drug screening using fluorescent polymer sensing. It operates from -20°C to 55°C, provides alarm alerts in under 6 seconds, supports inhalation and wipe modes, features a 3-inch TFT display, USB interface, and stores up to 50,000 results.

Thumb

0 repins 0 comments

Labtron air quality monitor provides rapid measurement of PM2.5, PM10, CO, NO₂, SO₂, O₃, VOC, H₂S, NH₃, temperature, humidity, and weather parameters using electrochemical, IR, laser, and PID sensors, featuring built-in pump suction with 800 ml/min flow for on-site monitoring.

Thumb

0 repins 0 comments

Labtron biological microscope features a finite optical system with binocular 30° inclined head, WF10X/18 mm eyepieces, achromatic 4x–100x oil objectives, click-stop quadruple nosepiece, coaxial focusing (0.002 mm), Abbe condenser, and 3W adjustable LED illumination for teaching and clinical use..

Thumb

0 repins 0 comments