Benchtop PH Meter LBPM-B11 - Ph and Orp Meter Labtron Benchtop PH Meter measures −2.000 to 20.000 pH with 1 to 5-point calibration and automatic temperature compensation. Supports ORP modes, electrode diagnosis, buffer recognition, stability control, and interval logging. A 7-inch TFT display, USB output, and 1000-set memory store data.

Thumb

Avatar

0 repins 0 comments

Differential Blood Cell Counter LBCR-A10 - Digital Blood Cell Counter Labtron Differential Blood Cell Counter counts 10 groups with a 0–99 range per group using a microcomputer-controlled manual method. Features LCD display, membrane keys, % key, and indicator light for organized viewing and statistics. Operates at 15–45 °C on AC220 V in a 0.6 kg unit.

Thumb

Avatar

0 repins 0 comments

Mullen burst tester TP-K11 - Burst Tester Machine Labtron Mullen Burst Tester measures paper bursting strength under rising hydraulic pressure in the 0 to 1600 kPa range. It features integrated mechanical and electrical design with a compact structure for easy maintenance. User friendly operation supports routine testing in paper and packaging labs.

Thumb

Avatar

0 repins 0 comments

Acid Number Tester LAAT-A12 - Potentiometric Titration Instrument Labtron Acid Number Tester uses microprocessor-controlled potentiometric titration to measure ≥0.05 mg KOH/g acid number within a 0 to 1800 mV range. It includes a 10 mL burette with a minimum volume of 0.001 mL and ±0.1% FS precision. Operates at 5 to 35 °C on AC 220 V in a compact 14 kg unit.

Thumb

Avatar

0 repins 0 comments

Haematocrit Centrifuge LHC-A10 - Blood Separation Centrifuge Labtron Haematocrit Centrifuge operates at up to 12000 r per min with a maximum RCF of 15800 x g for micro blood separation. It accommodates 24 capillary tubes and supports uniform processing in each run. A triple layer steel jacket frame improves chamber safety and structural strength for lab use.

Thumb

Avatar

0 repins 0 comments

Labtron Liquid Particle Counter detects particles from 0.8 µm to 600 µm in a single test for detailed contamination analysis. It generates instant reports to streamline compliance and documentation. Designed for injectable drugs and IV fluids, it supports sterility control before patient use.

Thumb

Avatar

0 repins 0 comments

Labtron Lab Refrigerator-Freezer Combination offers 528 L capacity in an upright design. Refrigerator maintains 2–8 °C with forced air and auto defrost, while freezer runs at −10 to −26 °C with direct cooling. Powder-coated exterior and aluminium-lined interior support safe sample and vaccine storage.

Thumb

Avatar

0 repins 0 comments

Double Beam Balance LDBB-A10 - Precision Laboratory Balance Labtron Double Beam Balance is a mechanical weighing unit with a 2000 g capacity, 0.1 g division, and a stainless steel pan. It features dual beams with sliding weights, magnetic damping, agate bearings, and precision knife edges. Supports quick manual measurement without battery operation.

Thumb

Avatar

0 repins 0 comments

Semi-automatic Biochemistry Analyzer LSBA-A11 - Piccolo Xpress Chemistry Analyzer Labtron Semi-Automatic Biochemistry Analyzer is a tabletop unit with −0.3 to 3.0 abs range, ±0.1 °C accuracy, and selectable wavelengths. It includes a 7-inch LCD, fast keys, auto-dormant halogen lamp, and data interfaces. Supports quick analysis of blood and body fluids with stored results.

Thumb

Avatar

0 repins 0 comments

Labtron Amino Acid Analyzer operates at 0–42 MPa for controlled, accurate analysis. Precise flow rate and broad wavelength range support diverse amino acid profiling needs. Microprocessor-based scanning system reduces errors, suited for research, clinical, and pharmaceutical applications.

Thumb

Avatar

0 repins 0 comments

Tabletop Autoclave LTTA-A10 Medical Autoclave Labtron Tabletop Autoclave provides 20 L capacity with 105–134 °C range and 134 °C sterilization at 0.22 MPa. Safe door lock and low-water auto power cut with alarm work alongside cold air discharge and auto exhaust. Includes three stainless steel baskets, 0–60 min timer, and ±1 °C heat control.

Thumb

Avatar

0 repins 0 comments

Portable Electrolyte Analyzer LPEA-A11 - Whole Blood Electrolyte Analyzer Labtron portable electrolyte analyzer uses a 90 µL sample and delivers results in 25 s for K⁺, Na⁺, and Cl⁻ across multiple sample types. A 7-inch HD touchscreen supports USB, RS232, LIS, and wireless printing. Operates at 5–40 °C and ≤80% RH with encrypted reagent pack and 3.5 kg design.

Thumb

Avatar

0 repins 0 comments

Lab Spray Dryer LLSD-A10 - Pilot Scale Spray Dryer Labtron Lab Spray Dryer handles 30 ml to 2000 ml/hr using a borosilicate glass chamber and SUS 316 atomizer. A 7-inch LCD displays temperature, spray, pump, air pressure, and deblocking in automatic or manual modes. Supports up to 250 °C input, 1.5 l/h evaporation, and optional inert loop use.

Thumb

Avatar

0 repins 0 comments

Bilirubin Meter LABM-A10 - Bilirubin Tester Labtron Bilirubin Meter measures total bilirubin in blood using direct photometry with a long-life white LED light source. It requires only 40–45 µL sample volume and delivers results within 10 seconds. The compact, portable unit supports quick analysis with simple operation for routine testing.

Thumb

Avatar

0 repins 0 comments

Tissue Embedding System LTES-A10 - Embedding Machine Labtron Tissue Embedding System uses 220 V/50 Hz power: 650 VA for main/thermal units and 200 VA for the cryo unit. The main console spans ambient to 80°C in 1°C steps, while the thermal console offers adjustable heating and a large paraffin tray. The cryo console provides adjustable cooling with precise control for tissue processing.

Thumb

Avatar

0 repins 0 comments

Flame Photometer LFP-A10 - Digital Flame Photometer Labtron Flame Photometer measures K and Na across 0–100 ppm and 0–160 ppm with 0.01 ppm detection and response under 8 s. A 7-inch touch display, selectable flame sizes, flameout protection, and air compressor support operation. USB transfer, unit selection, and low sample uptake enable routine analysis.

Thumb

Avatar

0 repins 0 comments

Cleveland Open Cup Flash Point Tester LOFP-A11 - Flash Point Tester Labtron Cleveland Open Cup Flash Point Tester measures from room temperature to 400 °C with 0.1 °C resolution and 3–4 mm electronic ignition. ASTM D92 heating at 5–17 °C/min ensures ±2 °C below 150 °C and ±3 °C above. Large LCD, automatic arm, pressure correction, air cooling, and data print support testing.

Thumb

Avatar

0 repins 0 comments

Blood Gas Analyzer LBGS-A12 - Blood Gas Testing System Labtron Blood Gas Analyzer measures ten parameters from 150 μL arterial or venous blood using dry electrochemistry with results in about 5 minutes. It features an 8.9-inch touchscreen, LIS/HIS connectivity, and barcode printing. Room-temperature cartridges and a rechargeable battery support portable testing.

Thumb

Avatar

0 repins 0 comments

Benchtop Water Bath LBWB-A12 - Constant Temperature Water Bath Labtron Benchtop Water Bath provides 10 L capacity with a temperature range of -5 °C to 100 °C and ±0.05 °C fluctuation. Digital control with water level monitoring, alarms, and configurable modes manages heating. Dual-layer insulation, adjustable stands, and 1300 W power support continuous operation.

Thumb

Avatar

0 repins 0 comments

Labtron Hot Plate Magnetic Stirrer offers digital heating and stirring with 350 °C maximum temperature and 200–2000 rpm speed range. Dual PT100 and K sensors with LCD display show temperature and speed together. Ceramic-coated plate supports 5 L volume with continuous operation.

Thumb

Avatar

0 repins 0 comments

High Shear Homogenizer LHSH-A12 - Digital High Shear Mixer Labtron High Shear Homogenizer operates from 200 to 11000 rpm and processes up to 40 L with a 70 mm head and interchangeable stators for continuous homogenization. Compact vertical design, stepless speed control, stable shaft coupling, and SS316L parts support dispersion, emulsifying, and cell pulping.

Thumb

Avatar

0 repins 0 comments

Blood Gas Analyzer LBGS-A10 - Blood Gas Testing System Labtron Blood Gas Analyzer uses 120 µl whole blood and 50 µl capillary blood, delivering results in under 90 seconds. A 10.4-inch TFT touchscreen supports quick entry and clear viewing with one- and two-point automatic calibration. Supports multiple sample types with standby mode and data management.

Thumb

Avatar

0 repins 0 comments

Labtron Orbital Shaker runs at 30–300 rpm with ±1 rpm accuracy and a 26 mm orbit for consistent mixing. A single platform holds up to 500 ml × 30 flasks with 0–9999 min/hr timing. Brushless DC motor, LCD display, and auto-save support stable lab operation.

Thumb

Avatar

0 repins 0 comments

Biological Microscope LBM-B10 - Binocular Compound Microscope Labtron Biological Microscope features finite optics with 4×–100× objectives and WF10× eyepiece. Siedentopf binocular head tilts 30° with 48–75 mm range and 360° rotation with double-layer stage. Coaxial focus, Abbe condenser, LED illumination, and backward nosepiece support viewing.

Thumb

Avatar

0 repins 0 comments

High Speed Centrifuge LHS-B10 - Laboratory High Speed Centrifuge Labtron High Speed Centrifuge delivers 21,000 rpm and 30,910 × g with 6 × 100 ml capacity. Microprocessor control with digital display, 1–99 min timer, and brushless DC motor regulate running. Stainless steel chamber, 3-tier steel cover, auto electric lock, and 10-program memory complete operation.

Thumb

Avatar

0 repins 0 comments

Bench-top Standard Freeze Dryer LBFD-A11 - Laboratory Lyophilizer Labtron Bench-Top Freeze Dryer features −80 °C condenser and 3 kg/24 h ice capacity for solvent samples. LCD touch display shows sample temperature, vacuum curve, and cold trap data below 10 Pa. Includes oil mist filtration, oil return, acrylic door, and corrosion-resistant cold trap.

Thumb

Avatar

0 repins 0 comments

White Blood Cell Analyzer LWBC-A10 - Portable WBC Analyzer Labtron WBC Analyzer uses microfluidic optical detection with 10 µL blood to measure WBC differentials in 3 min or 45 s fast mode. It stores 3000 results and supports USB, Bluetooth printing, and a rechargeable battery. A 750 g compact unit with insertable microcuvette and pattern recognition.

Thumb

Avatar

0 repins 0 comments

Labtron Stainless Steel Water Distiller produces 10 L/hr distilled water using regular water with a 1:10 consumption ratio. It features a single reservoir unit with flow control valve, narrow piping, and gas exhaustion vent. Includes standard control, compact design, and stainless steel body for clean distillation.

Thumb

Avatar

0 repins 0 comments

Labtron Automatic Seed Counter counts grains from 0.7 to 4 mm and up to 10 mm using photoelectric sensing and microcomputer control. It counts ≥1000 grains in 3 minutes with high counting accuracy for small and large particles. Includes LED display, adjustable preset values, and real-time counting feedback.

Thumb

Avatar

0 repins 0 comments

Labtron Hematology Analyzer eports 25 parameters with 3 histograms and 3D scattergram using laser scatter and impedance methods. It performs 60 tests per hour with low sample volume and cyanide-free HGB testing. Includes a 14-inch touch screen, LIS connectivity, and large data storage.

Thumb

Avatar

0 repins 0 comments

Next Page