Vacuum concentrator centrifuge LVC-A11 - Vacuum Concentrator Labtron Vacuum Concentrator Centrifuge uses centrifugal force under vacuum to concentrate samples by solvent evaporation. It operates at 1500 rpm with a temperature range from room temperature to 60 degree C. A TFT LCD touch screen with microcomputer control supports user interface and operation.

Thumb

Avatar

0 repins 0 comments

Ultrasonic Homogenizer (Sonicator) LUHS-A10 - Homogenizer Labtron Ultrasonic Homogenizer supports 600 ml capacity with programmable power from 10 to 900 W. It operates within 0 to 100 degree C with a 4.3 inch TFT touch screen for control. Self diagnostic function with login password protection supports controlled sample processing.

Thumb

Avatar

0 repins 0 comments

Microplate Reader LMPR-A20 - Laboratory Plate Reader Labtron Microplate Reader offers a 400 to 850 nm range with 0.001 Abs resolution and 0.000 to 4.000 Abs reading range. Supports 48 and 96 well plates with a silicon photodiode detector and linear shaking with 3 speeds. Features filter wheel up to 8 filters with a built-in printer and multi-interface connectivity.

Thumb

Avatar

0 repins 0 comments

Microplate Reader LMPR-A15 - Absorbance Microplate Reader Labtron Microplate Reader offers a 400 to 800 nm range with 0.001A resolution and high-speed reading up to 3s. Supports 96 and 48 well plates with a silicon photodiode detector and linear shaking with 3 speeds. Features a 10.4-inch display with a built-in printer and stores up to 20 million data points

Thumb

Avatar

0 repins 0 comments

Ultrasonic Homogenizer (Sonicator) LUHS-A10 - Homogenizer Labtron Ultrasonic Homogenizer supports 150 ml capacity with adjustable power from 2 to 150 W. It offers 0 to 100 degree C control with 20 to 25 kHz frequency and automatic tracking. A 4.3 inch TFT screen with data storage and protection functions supports controlled ultrasonic processing.

Thumb

Avatar

0 repins 0 comments

Ultrapure Water System LUWS-A10 - Lab Pure Water System Labtron Ultrapure Water System produces 10 L per hour using a multi filter unit with ABS construction and powder coating. It operates at inlet pressure of 0.15 to 0.5 MPa with a built in 10 micron stainless steel filter. Water quality sensors with switch signals support monitoring and control.

Thumb

Avatar

0 repins 0 comments

Labtron Bilirubin Meter measures total bilirubin in blood using a direct photometry method. Requires only 40–45 µL sample volume and delivers results within 10 seconds for rapid testing. White LED light source with compact portable design supports efficient blood sample analysis in clinical settings.

Thumb

Avatar

0 repins 0 comments

Microplate Incubator LMCI-A10 - ELISA plate incubator Labtron Microplate Incubator offers RT +5°C to 80°C range with ±0.3°C accuracy and uniformity for precise incubation. Supports 2 plates, including 96/384 well formats with PID control and heating up to 80°C in <15 min. Features LCD display and timer with alert sound in a compact 4 kg design.

Thumb

Avatar

0 repins 0 comments

Labtron Benchtop Vacuum Packing Machine features a single-chamber design with 120 W sealing power for efficient vacuum packaging. Adjustable vacuum degree and heat-sealing time support plastic or aluminum composite films. One-touch chamber operation enables protection against oxidation, moisture, and contamination.

Thumb

Avatar

0 repins 0 comments

Melting Point Apparatus LDMP-A13 - Touch Screen Melting Point Apparatus Labtron Melting Point Apparatus offers RT to 400°C range with 0.1°C resolution and PID temperature control. Colour touchscreen displays 3 samples with individual and average values and adjustable heating rate 0.1 to 10°C per min. Built-in cooling fan and closed furnace design with RS-232 interface.

Thumb

Avatar

0 repins 0 comments

Low Speed Centrifuge LLS-A58 - Benchtop Centrifuge Labtron Low Speed Centrifuge delivers 5000 rpm with ±10 rpm accuracy and 3186×g RCF for 12×15 mL tubes. The inverter motor ensures low-noise operation at ≤55 dB with 10 ACC/DEC rates and 6 programs. Includes lid lock and imbalance protection with a blast-proof chamber and IEC 61010 compliance.

Thumb

Avatar

0 repins 0 comments

TSS Meter LTSS-A10 - Digital TSS Meter Labtron TSS Meter measures concentrations from 0.01 mg per L up to 20000, 45000, or 120000 mg per L. It operates under pressure up to 0.4 MPa and uses infrared absorption with double scattering technology. This method minimizes influence from water colour during measurement.

Thumb

Avatar

0 repins 0 comments

Labtron Benchtop pH Meter measures across a 0.00–14.00 pH range for routine laboratory testing. Two-point calibration supports USA or NIST buffer standards with automatic or manual temperature compensation. Backlit LCD displays pH value and temperature simultaneously for clear monitoring.

Thumb

Avatar

0 repins 0 comments

Test Sieve Shaker LLTS-A10 - Laboratory Test Sieves Labtron Test Sieve Shaker supports 1 to 8 sieve layers operating at 1400 rpm for particle distribution analysis. It uses 200 mm diameter sieves and handles 50 to 150 g samples. The unit is suitable for particle size testing of powders, particles, and liquid based materials.

Thumb

Avatar

0 repins 0 comments

Multi-Position Heating Mantle LMHM-A12 - Heating Mantle Labtron Multi Position Heating Mantle supports six positions with 6 × 500 ml capacity and a temperature range from RT+20 to 250°C. It features stepless adjustment with electronic temperature control for uniform heating. Anti corrosion construction with rotary knobs supports temperature and speed setting

Thumb

Avatar

0 repins 0 comments

Low Speed Centrifuge LLS-A21 - Benchtop Centrifuge Labtron Low Speed Centrifuge delivers 5500 rpm speed with 4919×g RCF and capacity up to 4×250 ml. Equipped with an HD LCD and a one-touch centrifuge button with start and arrival timing modes. Stainless steel chamber with electronic door lock and overspeed, overheat, and unbalance protection supports operation.

Thumb

Avatar

0 repins 0 comments

Leaf Area Meter LLAM-A10 - Digital Leaf Area Meter Labtron Leaf Area Meter measures leaf area, length, and width up to 2000 mm × 155 mm with ±2% accuracy and 0.01 cm² resolution. Host–probe integrated design with LCD screen and built-in calibration module supports operation. Lithium battery power and storage up to 5000 groups allow field data recording.

Thumb

Avatar

0 repins 0 comments

Labtron Benchtop Multi-Parameter Water Quality Meter measures pH, conductivity, and TDS for comprehensive water analysis. Multiple measurement modes support diverse testing needs. Stores up to 500 data sets with calibration reminder to maintain consistent measurement accuracy.

Thumb

Avatar

0 repins 0 comments

Lasting Adhesive Tester TLAT-A10 - Bond Strength Tester Labtron Lasting Adhesive Tester features 3 testing stations with a timing range from 0 to 99 h 59 min 59 s. It includes standard test plates, a 2000 ± 50 g roller, and 1000 ± 3 g plate weights. Equipped with microprocessor control, LCD, and auto timing with locking functions.

Thumb

Avatar

0 repins 0 comments

Soil Nutrient Tester TSNA-A10 - Soil Nutrient Analyzer Labtron Soil Nutrient Tester uses microprocessor control to measure nutrient values in percent. An LCD touch display shows parameters and results with a built in printer for reports. An optical filter light source with silicon semiconductor receiver supports long service life up to 100000 hours.

Thumb

Avatar

0 repins 0 comments

Slide Dryer LSLD-A11 - Laboratory Slide Dryer Labtron Slide Dryer operates from room temperature to 90°C with a microprocessor controller for stable temperature control. Automatic memory restoration recovers previous settings after power interruption. Integrated temperature sensing blocks support consistent monitoring for tissue section drying.

Thumb

Avatar

0 repins 0 comments

Short Span Compression Tester LSCT-A10 - Span compression Labtron Short Span Compression Tester measures forces from 1 to 500 N, equivalent to 0.06 to 33.3 kN per m. It supports 15 mm sample width with ±0.1 mm tolerance. An open design enables easy sample placement, while a pneumatic clamping system holds the sample firmly during testing.

Thumb

Avatar

0 repins 0 comments

Benchtop Gloss Meter features a testing time of 0.5 s,providing rapid gloss assessment with accurate surface evaluation. It includes a calibration plate to provide a standard reference surface for verifying and adjusting the device's accuracy. The system is integrated with triple angle measurement mode, maintaining gloss on different surface types. Our benchtop gloss meter offers optical measurement technology for accurate gloss readings by evaluating light reflection at specific angles.

Thumb

Avatar

0 repins 0 comments

High Temperature Drying Oven LHDO-A22 - High Temperature Lab Oven Labtron High Temperature Drying Oven offers a 220 L chamber with a temperature range RT plus 20°C to 500°C. It features a 304 stainless steel interior with adjustable shelves and a 0.1°C display resolution. Equipped with PID temperature control, a multi-step LCD program controller, and a ceramic heat seal door.

Thumb

Avatar

0 repins 0 comments

Rockwell Hardness Meter TRHM-A10 - Rockwell Tester Labtron Rockwell Hardness Meter operates with a total test force range of 588 N to 1471 N with manual loading control. It features an analogue display with 0.5 HR resolution and supports specimens up to 170 mm height. Adjustable dwell time from 0 to 30 seconds suits hardness testing tasks.

Thumb

Avatar

0 repins 0 comments

Reciprocal Shaker LRS-A30 - Recipro Shaker Labtron Reciprocal Shaker uses microprocessor control with adjustable speed for gentle to vigorous agitation. It supports various platforms for flasks, plates, and 96 well plates. An LCD display shows time and speed, while low noise operation suits molecular biology, microbiology, and chemistry labs.

Thumb

Avatar

0 repins 0 comments

High Shear Homogenizer LHSH-A12 - Emulsifying Homogenizer Labtron High Shear Homogenizer operates at 200 to 11000 rpm with digital touch control for speed regulation. It processes up to 40 L using a 70 mm working head with interchangeable stators. Features: SS316L contact material, stepless speed adjustment, and compact vertical structure for continuous operation.

Thumb

Avatar

0 repins 0 comments

Portable Suspended Solids Meter LPSS-A10 - Solids Analyzer Labtron Portable Suspended Solids Meter measures suspended solids with an operating temperature range of 0 to 50 degree C. An infrared absorption and scattering light sensor supports measurement with an IP67 protected probe. A 3.5 inch color display with data storage and USB export supports field use

Thumb

Avatar

0 repins 0 comments

Handheld Homogenizer LHHH-A10 - High Speed Homogenizer Labtron Handheld Homogenizer operates at 1000 to 32000 rpm with 6 gear speed control for homogenization, emulsification, and dispersion. It processes 0.2 to 150 ml samples with an SS 316 operating head. Features an adjustable height stand, stable base, support, and double insulation for safe operation.

Thumb

Avatar

0 repins 0 comments

Portable Silt Density Index Tester LSDI-A10 -Portable SDI Tester Labtron Portable Silt Density Index Tester measures SDI from 0 to 20 with selectable filtration time of 1 to 15 minutes. A DC 12 V rechargeable battery provides up to 25 hours operation, while a built in booster pump supports low inlet pressure. The unit suits field and water filtration testing.

Thumb

Avatar

0 repins 0 comments

Next Page