Labtron gas chromatography mass spectrometer with a pre-filter mass analyzer and electron multiplier for enhanced sensitivity. It features 1-10 ml/min flow rate 450°C inlet temperature, simultaneous analysis with different components increasing productivity and a turbo molecular pump for efficient simultaneous component analysis.

Thumb

Avatar

0 repins 0 comments

Labtron ion chromatograph system features a dual cation and anion channel design that operates independently and detects simultaneously. It includes a 35 MPa high-pressure tandem pump, 0.001 to 9.999 ml/min flow range, and temperature-controlled bipolar conductivity detector for accurate results.

Thumb

Avatar

0 repins 0 comments

Labtron ion chromatograph system boasts a modular design and stable performance, with a maximum pressure of 35 MPa and a flow range of 0.001 to 9.999 ml/min. It features a PEEK plastic flow path and a temperature-controlled bipolar conductivity detector with a detection range of 0 to 45,000 µS/cm.

Thumb

Avatar

0 repins 0 comments

Labtron ion chromatograph system features upgraded circuit technology with a high-pressure tandem pump (35 MPa) and a flow range of 0.001 to 9.999 ml/min. The unit also includes a built-in KOH/NaOH eluent generator for low-pressure degassing and bipolar conductivity detection for optimal stability.

Thumb

Avatar

0 repins 0 comments

Labtron gas chromatography is a benchtop unit featuring advanced flow controller (AFC) technology. It has a 22 L maximum oven capacity and a temperature range of RT + 7 °C to 420 °C, with a 7-inch LCD display showing temperature, gas flow, and heating curves.

Thumb

Avatar

0 repins 0 comments

Labtron benchtop ball mill is designed for ultra-fine grinding with a small batch capacity. It features a compact design, a roller length of 260 mm, and accommodates materials up to 10 mm for soft and 3 mm for hard materials, supporting both dry and wet milling processes.

Thumb

Avatar

0 repins 0 comments

Labtron benchtop ball mill features rubber-covered rollers driven by an electric motor for roll-type milling at speeds of 70-80 rpm. It has a single pot, 60 mm × 300 mm roller size, and a durable steel plate body with a powder-coated finish, ensuring high operational stability.

Thumb

Avatar

0 repins 0 comments

Labtron alloy analyzer is an XRF spectrometer designed for elemental analysis from Sodium (Na) to Uranium (U) with up to 0.05% precision. It features a UHRD/SDD detector, advanced vacuum system, built-in SNE, and a high-efficiency super-thin X-ray light tube.

Thumb

Avatar

0 repins 0 comments

Labtron handheld dust meter is an air quality analyzer using the light scattering principle for fast detection of PM1.0, PM2.5, and PM10. It features a resolution of 0.1 µg/m³, a concentration limit of 1000 µg/m³, and a 6-channel size display with simultaneous PM readings on an LCD screen

Thumb

Avatar

0 repins 0 comments

Labtron dust monitor is a portable unit that uses the light scattering principle to measure particulate mass concentration. It features 15 channels for PM10, PM2.5, PM1.0, and TSP, with a sensitivity of 0.0001 mg/m³, providing both number and mass concentration readings.

Thumb

Avatar

0 repins 0 comments

Labtron dual flow particle counter is a six-channel, microcomputer-controlled unit with dual flow rates (2.83 L/min and 50 mL/min) and a built-in air pump. It detects particles from 0.3 µm to 10.0 µm with 0.3 µm sensitivity. Features include data conversion (ft³/m³) and multiple display modes.

Thumb

Avatar

0 repins 0 comments

Labtron portable airborne particle counter is a 6-channel, microcomputer-controlled unit that simultaneously monitors particles in sizes from 0.3 µm to 10.0 µm. With laser-based detection, dual counting modes (auto/manual), and a 0.1 CFM flow rate, it supports Class 100 to 300,000 tests.

Thumb

Avatar

0 repins 0 comments

Labtron handheld airborne particle counter is a six-channel microcomputer-controlled device, measuring particle sizes from 0.3 µm to 5.0 µm with a 0.1 CFM flow rate. It features a high-resolution LCD for particle count display, data conversion (ft³/m³), delay time, and zero count function.

Thumb

Avatar

0 repins 0 comments

Labtron Air Shower is a specialized enclosed chamber featuring an entry portal and stainless steel casing with a HEPA filter for 99.999% efficiency at 0.3µm. It offers a spraying wind speed of 25 m/s and an adjustable air shower time from 0 to 99 seconds. Features include circulation wind to maintain cleanliness in the shower area under non-shower status , double doors with electric interlocks, and an LED display with adjustable blowing time.

Thumb

Avatar

0 repins 0 comments

Labtron fabric air permeability tester features a high-precision sensor for dynamic measurements and microcomputer processing for direct results, eliminating manual calculations. It measures permeability from 1 to 40,000 mm/s, with an accuracy of ≤ ±2%, ensuring precise airflow feedback regulation.

Thumb

Avatar

0 repins 0 comments