https://www.qinsun-lab.com/2054.html Applicable standards: GB/T 11047, ASTM D3939 Technical parameters: 1. Number of working stations: 4 2. Rotor size: diameter Φ82mm (including the thickness of the outer rubber 3mm), width 210mm. 3. 3. Rotor speed: 60±2r/min 4. Total mass of nail hammer: 160±10g (including 11 nails inserted at equal intervals) 5. Needle: exposed length 10mm, tip radius: R0.13mm 6. Fixed guide bar: working width 125mm, diameter 10mm

Thumb

Avatar

0 repins 0 comments

The preparation and operating procedures before using the Taber Abrasion Tester are as follows. 1. Secure the specimen on the test turntable, attach the required test weights and ensure that the test wheel does not come into contact with the specimen's secure fixture during the test. 2. After setting the number of tests according to the test requirements, the whole machine is in standby mode. Operation example: Zhang 1. Connect to the appropriate power supply 220V or 110V according to the label 2. Manually rotate the test disc to ensure that the grinding wheel does not come into contact with the fixture during the test. https://www.testerinlab.com/news/703.html

Thumb

Avatar

0 repins 0 comments

On 26 January 2022, the Committee on Dumping, Subsidies and Non-Tariff Barriers to Trade of the Peruvian National Institute for the Protection of Competition and Intellectual Property issued Notice No. 007-2022/CDB-INDECOPI, initiating an anti-dumping investigation against 100% polyester fabric originating in China, upon the application of Peruvian enterprise TecnologíaTextilS.A. On 25 August 2022, Peru issued a decision in the case. On 25 August, Peru made an affirmative preliminary ruling on the case, preliminarily ruling that a provisional anti-dumping duty of US$3.93/kg was imposed on the product in question, valid for six months. https://www.qinsun-lab.com/News-and-events/2043.html

Thumb

Avatar

0 repins 0 comments

Light sources1. D65 International Standard Artificial Daylight│Colour temperature: 6500K│Wattage: 2 x 18W2. TL84 European, Japanese light source│Colour temperature: 4000K│Wattage: 2 pieces x 18W3. Cool light source for US shops│Colour temperature: 4200K│Wattage: 2 pieces x 20W4. Sunset lamp, yellow light and colour comparison reference│Color temperature: 2700K│Wattage: 4 pieces x 40W5. UV lamp│Fluorescent│Power: 1 piece x 20W Control methodHigh frequency electronic start, saving waiting time. Timer5 sets, recording the time the light is used. It is normal for the lamp to burn very strongly when switched on and off frequently. It is recommended to replace the lamp after 1000 hours of use.

Thumb

Avatar

0 repins 0 comments

Physical testing of textiles is generally carried out in the following categories: - Colour fastness- Washing shrinkage and appearance- Fabric quality (tensile strength, tear strength, seam slippage, breathability, fabric density, elasticity, etc.)- Durability (abrasion resistance, pilling)- No wash and iron- Water and oil repellency- Fibre composition testing- Product safety (sharp points/edges, small objects, torsion/tension test, odour, pH, button test, etc.)- Flammability (combustibility) https://www.qinsun-lab.com/News-and-events/2035.html

Thumb

Avatar

0 repins 0 comments

How to use the taber wear resistance testing machine: cut the test piece with a standard cutter, use a specified type of grinding wheel, and load a certain weight to wear it, take out the test piece after the specified number of revolutions, observe the condition of the test piece after grinding or The difference between the weight of the specimen before the test and the weight after the test. Taber Abrasion Tester implements DIN-53754, 53799, 53109, 52347, TAPPI-T476, ASTM-D1044, D3884, ISO-5470 and other test standards. https://www.testerinlab.com/news/700.html

Thumb

Avatar

0 repins 1 comments

Relevant preparations need to be made before the Martindale flat grinding experiment, so that the experiment can be carried out more accurately and the relevant results can be obtained. The technical engineer of Standard Group briefly summarized as follows: https://www.qinsun-lab.com/News-and-events/2034.html

Thumb

Avatar

0 repins 0 comments

The choice of environmental temperature: some products need to be tested in a temperature environment of minus degrees Celsius ozone resistance test, some are tested at room temperature, and some are tested at high temperatures. Users just need to understand their own products to test the common test temperature can be. It is important to note that testing at room temperature is more common. Conditions can be placed in the Ozone aging chamber premises equipped with air conditioning systems, it is recommended that users choose the test chamber with a refrigeration system when purchasing, to avoid the summer test, the temperature is too high resulting in inaccurate results. Ozone aging chamber Chamber volume selection: because the Ozone aging chamber chamber materials and ozone concentration control accuracy difficulties will have a corresponding increase, so as long as the test products can be accommodated on, too large chamber will only cause waste. https://www.standard-groups.com/en/News/709.html#m

Thumb

Avatar

0 repins 1 comments

pay attention to for spring tension and compression testing machine: 1. The displacement sensor is a precise optical, mechanical and electrical measuring device, which cannot be disassembled or impacted at will.2. The internal memory can store the data of 40 samples at most. When the number exceeds this number, it will be automatically overwritten and stored from 1. If you need to save the function that will be overwritten, please use the "Query/Print" button in advance to save the data. This content is printed.3. If there is abnormal sound during the operation of the testing machine, stop the machine immediately and check the lubricating parts.4. After the test machine is used, it should be covered with machine clothes to prevent dust from falling into the machine.5. In order to protect personal safety, the testing machine should be properly grounded. https://www.qinsun-lab.com/News-and-events/2028.html

Thumb

Avatar

0 repins 0 comments

product features: Vertical flammability testing machine/textile flame retardant testing equipment with three types of burners and variable size combustion chamber Stainless steel cabinet with transparent tube side windows Bunsen burner flame, conforming to ASTM D5025 standard The ignition time can be set freely Timer accuracy is 0.1 seconds Standard stainless steel sample holders available Through the replacement of different sample holders, it can meet the requirements of different standards Automatically move the Bunsen burner mode, there is no time difference in the process of lighting and extinguishing http://burningtester.com/products/textile_flammability_tester/583.html

Thumb

Avatar

0 repins 1 comments

Under the specified conditions, the specimen is first placed at an angle of 45°, the specimen is lit for 1s, and then the specimen is flamed upwards for a certain distance as a measure of the burning intensity of the textile. With the surface pile of the fabric, the backing of the ignition or melting as an additional indicator of the intensity of combustion. Flammability Chamber 2、Damage area and damage length test. In the prescribed test conditions, the 45 ° direction of the textile specimen ignition, the measurement of the fabric burning after the renewal and negative combustion time, damage area and damage length. http://thentest.com/News-and-events/1744.html

Thumb

Avatar

0 repins 1 comments

Why is the flammability test very important？ Fire accidents caused by flammable clothing in daily life occur frequently at home and abroad. So people are paying more and more attention to the flame-retardant properties of textile and clothing products. The research of flame retardant performance testing methods is also the focus of scientific researchers. http://burningtester.com/news/581.html

Thumb

Avatar

0 repins 1 comments

The Abrasion Resistance Tester is an important instrument for measuring the performance and durability of leather products in use. During the test, the abrasion resistance of the specimen is determined by applying friction in the tangential direction to a rotating specimen by means of a friction component. Fastness to Friction. It is the degree to which the colour and coating of the leather surface changes or is transferred when the leather is rubbed. Fastness to friction test with standard white lining cloth or white wool sticky, under a certain pressure (test head mass 500g, 1000g ), in the leather surface for reciprocal friction (dry white lining cloth or white wool sticky for reciprocal friction for dry friction, with wet white lining cloth or white wool sticky for reciprocal friction for wet friction), and use standard grey sample card to assess the leather colour change and white lining cloth or white wool sticky The change in colour of the leather and the staining of the white lining or white wool. leather product Test methods for determining the abrasion resistance of leather: There are two methods for determining the abrasion resistance of leather, namely the end point method and the change in appearance method.

Thumb

Avatar

0 repins 1 comments

Product characteristics. All stainless steel construction with anti-corrosion case for maximum instrument life. two tempered glass doors for easy observation of the test condition. Specimen holder can be moved up and down, left and right to ensure that the flame burning point is in the centre of the sample or at a defined distance. the burner is mounted on a sliding rail for freedom of movement Equipped with two types of sample holder and sample template made of stainless steel and moulded for impact angle of ignition source: vertical, 45°. http://burningtester.com/news/580.html

Thumb

Avatar

0 repins 2 comments

The attached thermocouple is equipped with a temperature controller, which can accurately measure the temperature of the hot wire. The circuit of the control unit is fully protected by fuses and miniature circuit breakers. QINSUN Glow Wire Test Equipment is a fully automatic instrument, which is contained in its own cabinet, to maximize the safety of operators, and the large observation window and black wall ensure convenient observation. https://www.qinsun-lab.com/News-and-events/2015.html

Thumb

Avatar

0 repins 1 comments

QINSUN instruments to provide you with automatic Bursting Strength tester parameters, prices, models, principles and other information, more relevant information can call for advice, the company's customer service telephone 7 * 24 hours for your service. https://www.qinsun-lab.com/1065.html bursting strength tester,automatic bursting strength tester,paper bursting strength tester,digital bursting strength tester,bursting strength testing machine,bursting strength machine,auto bursting strength tester,automatic bursting strength testing machine,bursting strength tester price,carton bursting strength tester,bursting strength tester machine,bursting strength tester uses,mullen bursting strength tester,bursting strength tester digital

Thumb

Avatar

0 repins 0 comments

Washing color fastness tester is very widely used in textile companies, mainly for testing the dyeing and dye fastness of textiles. They are currently classified into the following categories.

Thumb

Avatar

0 repins 1 comments

LFY-645 Vertical and horizontal combustion performance tester for aviation materials The main purpose: LFY-645 Aviation Material Vertical and Horizontal Combustion Performance Tester is suitable for testing the flame retardant performance of aircraft and other aircraft interior parts and interior materials. It can be used by printing and dyeing industry, aviation interior materials production department, textile inspection department and scientific research institutes. Instrument Features: 1. Pulse ignition; 2. The ignition time can be set arbitrarily from 0 to 99.99 seconds, and the continuous burning time, smoldering time, and droplet burning time are all automatically recorded and digitally displayed; 3. The flame height can be adjusted; 4. The pressure of the air inlet of the igniter is adjustable; 5. Vertical and horizontal test integrated machine. Specifications: 1. The inner diameter of the nozzle of the igniter is: (9.5±0.3)mm; 2. Flame temperature: 1550°F; 3. Fuel gas: 99% methane; 4. Continuous combustion and smoldering time timer: 0～9999.9 seconds, accuracy: ±0.1 seconds; 5. The distance from the lower end of the straight sample and the front end of the horizontal sample to the igniter port is 19mm; 6. Vertical sample size: 76mm×305mm; horizontal sample size: not less than 254mm; 7. Working power supply: AC220v; 50Hz; 50W Applicable standard: FAR25.853 Instrument configuration: Combustion part, electrical control part, igniter gas supply pipeline adjustment system. Tag: flammability chamber,flammability test chamber,vertical flammability chamber,vertical flammability tester,horizontal vertical flame chamber,flammability testing equipment,vertical flammability test,vertical flammability testing chamber,astm d6413 vertical flammability chamber,astm d6413 vertical flammability test chamber,flammability tester,vertical flammability,fabric vertical flammability tester,cfr1615 flammability chamber ps: (WLJCDM809) https://www.qinsun-lab.com/191.html https://www.standard-groups.com/en/FlammabilityTesting/735.html email:info@qinsun-lab.com

Thumb

Avatar

0 repins 1 comments

The flame retardance of wood-plastic composites is usually tested by the limiting oxygen index tester, which is an experimental equipment independently developed and produced by Standard Group (Hong Kong) Co., Ltd. http://burningtester.com/news/577.html

Thumb

Avatar

0 repins 1 comments

China's textile and clothing exports have a good prospect in 2023 https://www.qinsun-lab.com/News-and-events/2004.html

Thumb

Avatar

0 repins 1 comments

Der Test misst mit einer gepulsten Xenonlampe das Leistungspaar E3, La-W 1, La -W2- und Er-Xenonlampen, die mit vier Arten von Mehrelement-Seltenerd-Wolframkathoden installiert waren, wurden für viele verwendetBeleuchtungstests. Die Testparameter waren: Spannung 3000 V, Frequenz 3 Hz, Kapazität 23 μF. Anschließend wurden eine Energiespektrumanalyse (EDS) und eine SEM-Beobachtung der Oberflächenmorphologie an den getesteten Elektroden durchgeführt und metallographische Proben wurden präpariert, um den Rekristallisationsstatus zu beobachten. https://www.qinsun-lab.com/443.html

Thumb

Avatar

0 repins 2 comments

The Circular track method fuzzing and pilling tester is used to test the condition of pilling balloons on woollen, chemical fibre cotton, blended, knitted and woven fabrics in order to identify the quality of the product and the effect of the process. The test is carried out by rubbing the fabric against a nylon brush and abrasive, or against the abrasive only in a damped state. https://www.standard-groups.com/en/News/682.html#m

Thumb

Avatar

0 repins 1 comments

Vertical Horizontal Burning Tester is a test equipment independently developed and produced by QINSUS Instruments, which is suitable for testing the flame retardancy of flame-retardant woven fabrics, knitted fabrics, coated products, laminated products and other products. http://burningtester.com/news/576.html

Thumb

Avatar

0 repins 1 comments

HD709S Mask synthetic blood penetration tester Features: 1. Color touch display, friendly man-machine interface, easier and more convenient operation.2. There is a specially designed overall water tank and discharge system on the spraying area, which can avoid polluting other working areas and facilitate cleaning work.3. The special sample fixing device can simulate the actual use state of the mask and leave a test area.jhyty https://www.qinsun-lab.com/News-and-events/1999.html

Thumb

Avatar

0 repins 0 comments

ICI pilling and snagging tester The cube rolling box type pilling test method is the most common, with cork gaskets and polyurethane tubes, it can complete the tests of ISO 12945.1, GB/T 4802.3 and other standards. If the hook nails are implanted on the six sides of the rolling box, the JIS standard and some buyer's test methods can also be completed. http://gellowen.co.uk/News/442.html

Thumb

Avatar

0 repins 0 comments

Heat Transmission Resistant Tester The tester mainly used for the determination of textiles, fire supplies and other materials thermal conductivity. http://www.qinsun-tester.com/Protective-clothing/286.html

Thumb

Avatar

0 repins 1 comments

Accelerate heat stress and other phenomena, and cause cardiovascular system and nervous system diseases in severe cases.Sweating Thermal ManikinIn related technologies, such as medium sweating dummy system, body model thermal dummy system, thermal dummy system, etc., although it can simulate human body metabolic heat production and can collect and control parameters such as dummy temperature and sweating amount , but it can only be used passively to study the heat exchange between the human body-clothing-environment, the measurement of clothing thermo-humidity performance, heat transfer coefficient, etc. It should be noted that the thermophysiological response of the human body is affected by the parameters of the human body-clothing-environment. The existing dummy system can simulate the heat produced by the human body and measure the heat exchange between the human body and the environment, but it does not have the thermophysiological regulation function of the human body and cannot Like humans, they can sense changes in the environment and make active adjustments. Therefore, the existing dummy system cannot solve the thermophysiological changes of the human body under the working condition of wearing protective clothing. https://www.qinsun-lab.com/News-and-events/1998.html

Thumb

Avatar

0 repins 1 comments

Flame Retardant Combustion Performance Tester

Thumb

Avatar

0 repins 1 comments

Sweating Thermal Manikin can reflect the factors that affect the heat exchange between the human body and the environment, these factors include: ① The surface area of the human body covered by fabric and the surface area of exposed skin;②The distribution of the clothing layer and the air layer on the surface of the human body (that is, non-uniformity);③ Tightness;④ Due to the increase of the heat dissipation area after the human body is dressed (that is, the clothing area coefficient);⑤ Influence of product design;⑥Changes in clothing characteristics (zippers are opened, headscarves are worn, etc.);⑦ Differences in temperature (and heat dissipation) of different parts of the human body;⑧The impact of human body posture (such as standing, sitting, lying down);⑨The impact of human activities (such as walking, cycling);⑩The Sweating Thermal Manikin test can reflect the real situation, because such a test can quantitatively describe the impact of the clothing system on the heat exchange between the entire human body and the environment.comfortable-thermal-manikinSweating Thermal Manikin will continue to be used to measure the thermal resistance and evaporative impedance of protective clothing systems. A useful tool in the development of protective clothing systems, Sweating Thermal Manikin can be used to evaluate protective clothing under steady state and transient conditions, as well as to predict wearer comfort (or thermal stress). Although the Sweating Thermal Manikin is easy to use, dummies, artificial climate chambers, computer control and data acquisition systems are expensive and complex to maintain, the Sweating Thermal Manikin is an important piece of equipment for protective clothing evaluation research and its research, development and application are of great practical importance. It is believed that with the cooperation of all relevant research institutions, the Sweating Thermal Manikin testing technology will be further developed in the near future. It is of great significance to evaluate the comfort and performance of protective clothing systems. More and more standard test methods use a life-sized Sweating Thermal Manikin to test the performance of protective clothing systems. Walter Sweating Fabric Manikin was used to evaluate the fire resistance and airtightness of different types of protective clothing.

Thumb

Avatar

0 repins 1 comments

Testing Standards:ASTM D7142-2/F963, CFR 1500, EN 71 PART 1, GB 6675, ISO 8124, M&S P115AApplications:Snap Tester is used to evaluate the fixed stength of fastners and buttons as well as garment accessories. In the designing and manufacturing of baby and children’s clothing, the detachment of fastners off the garment will cause childern in danger of choking.The test project qualifies the garment manufacturer to ensure that buttons, fastners and other accessories can be properly attached to the garment. Snap Button Tester – QINSUN (qinsun-lab.com)https://www.qinsun-lab.com/71.html

Thumb

Avatar

0 repins 1 comments

Next Page