Follow Avatar

qinsun lab

UV Aging Test Chamber

The ultraviolet aging test chamber is applicable to ASTMG154, GBT16422.3, GBT14522, GBT5170.9, GBT16776 and other standards. It is widely used in various industries, such as paint, paint, resin, plastic, plastic, printing and packaging, adhesives, automobile and motorcycle industry, building materials, communication products, cosmetics, metal, electronics, electroplating, medicine, etc. Structural material of Standard International UV aging test chamber: Standard International UV aging test chamber 1. UV aging test chamber space: 400 deep × Width 1140 × 390mm high 2. Overall dimension: depth 500 × 1300 wide × 1360mm high 3. Unit material: 304 stainless steel inside and outside

Thumb

Avatar

0 repins 1 comments

Which position should be selected for the results assessment? Although the irradiation levels are slightly lower on both sides, our recommendation is that all samples can be used for the results evaluation, but it is recommended that the sample position is changed during the test. If the customer does not wish to reposition the sample or requires irradiance uniformity of >90% at all positions, then they may choose to leave the end clips blank. https://www.qinsun-lab.com/aging-tester/index.html

Thumb

Avatar

0 repins 0 comments

Main features of the ozone ageing tester: The ozone gas generated by the silent high-efficiency ozone generator, and a certain amount of treated air, mixed in the exchanger and sent into the test chamber, the UV detector will continuously detect the ozone concentration online, feedback to the ozone generator control system, so that the control system according to the set value of effective control of ozone generation, so that the test chamber to maintain the appropriate ozone concentration, in by the heating and humidification system work to meet all test conditions. Durable Ozone ageing test chamber Ozone ageing test chamber design standards: Standards: JIS K 6259 ASTM1149 ASTM1171 ISO1431 DIN53509 GB/T13642 GB 2951 (test method for ozone resistance of electric wires and cables) and GB/T 7762-2003 (static tensile test for vulcanised rubber or thermoplastic rubber_ozone cracking resistance). https://www.testerinlab.com/products/Others/698.html

Thumb

Avatar

0 repins 0 comments

Water-cooled xenon lamp aging tester Atlas xenon lamp aging test chamber Water-cooled xenon lamp aging tester through the xenon lamp tube to complete the test of products and materials and produce results, the quality of the xenon lamp tube is very important for the equipment. So we should always pay attention to this aspect of the environmental testing industry, there are many test equipment manufacturers to play the price war, these three or five manufacturers will be in order to make profits and constantly reduce the production costs of water-cooled xenon lamp aging tester, the use of inferior xenon lamp and other spare parts. The price of this water-cooled xenon lamp aging test chamber is very low, in the use of the time it is easy to fail, there may be serious safety hazards in the use of the process. Even if there are no safety hazards, the inferior xenon lamp can not play the role of aging only the role of lighting, for the test can not help, the results of the test will not be accurate. https://www.standard-groups.com/en/News/707.html#m

Thumb

Avatar

0 repins 0 comments

There are two commonly used xenon lamp aging testers, one is the air-cooled xenon lamp aging test chamber, its structure is to irradiate from the top to the bottom, and the sample is placed on the slope below, and the other is the drum type structure, the xenon lamp tube is located In the middle of the drum, the sample is placed on the drum wheel. Atlas xenon lamp aging test chamber Comparison of test data of water-cooled xenon lamp aging tester with natural aging data: https://www.standard-groups.com/en/News/666.html#m

Thumb

Avatar

0 repins 0 comments

UV-880 Ultraviolet Aging Tester 1. Standardize the site and location of UV Aging Test Chamber equipment: the test equipment has certain requirements for the site, not only for the size of the site, but also for the temperature and humidity, which should meet certain conditions. There are no flammable, explosive and other dangerous goods that are likely to cause fire in the site. When the site meets the requirements, there are also requirements for the location of the equipment, because the equipment will have heat dissipation during operation, Therefore, there should be no objects around the equipment as far as possible to avoid affecting the test effect. In addition, there should be emergency disposal configurations such as fire fighting around the site to avoid more serious consequences caused by unexpected accidents.UV-880 Ultraviolet Aging Tester.jpg2. Pay attention to the relevant parameters of the UV Aging Test Chamber equipment: Now the equipment has multiple control systems, and the parameters of different systems are inconsistent. When setting the relevant parameters, make sure they meet the corresponding standards. https://www.qinsun-lab.com/News-and-events/1982.html

Thumb

Avatar

0 repins 0 comments