Labtron Microplate Reader performs UV-Vis analysis of 96-well plates in 10 s and 384-well plates in 30 s with linear shaking and a xenon flash lamp. It supports 200–1000 nm wavelength range, 0–4.0 OD measurement, and touchscreen operation with Reader It-II software.

Thumb

Avatar

0 repins 0 comments

Labtron microplate reader performs UV-Vis analysis of 96-well plates in 10 s and 384-well plates in 30 s with linear shaking and a xenon flash lamp. It supports 200–1000 nm wavelength range, 0–4.0 OD measurement, and touchscreen operation with Reader It-II software.

Thumb

Avatar

0 repins 0 comments

Labtron microplate reader performs UV-Vis analysis of 96-well plates in 10 s and 384-well plates in 30 s with linear shaking and a xenon flash lamp. It supports 200–1000 nm wavelength range, 0–4.0 OD measurement, and touchscreen operation with Reader It-II software.

Thumb

Avatar

0 repins 0 comments

Labtron handheld XRF Spectrometer performs energy-dispersive X-ray fluorescence for elements from Mg to U with ppm–100% range and 1–60 s testing. It includes an SDD detector, 5-inch HD touchscreen with 360° rotation, and digital multichannel analysis. A 9000 mAh battery enables testing of solids.

Thumb

Avatar

0 repins 0 comments

Labtron Orbital Shaker is a compact benchtop unit with single-layer orbital motion, 50–300 rpm speed, ±1 rpm accuracy, Φ50 mm amplitude, and 30 kg load. It has a PID controller with 8-segment programs and LCD display. Steel build adds alarm, leakage protection, auto power-off, and quiet single-axis drive.

Thumb

Avatar

0 repins 0 comments

Labtron Gas Chromatography System uses AFC-controlled H₂ and N₂ flow with polar capillary columns for precise separation. The GC oven supports 9-step programs with rapid cooling and dual FID detectors. LCD display, capillary split sampler, and software enable fast data processing and batch testing.

Thumb

Avatar

0 repins 0 comments

Labtron Fully Automatic Kjeldahl Analyzer measures nitrogen from 0.1–240 mg with a 3–8 min analysis time. Variable-speed titration with automatic distillation, calculation, and waste handling supports routine lab work. Touchscreen control, autosampler support, and large data storage enable batch testing.

Thumb

Avatar

0 repins 0 comments

Labtron oil and grease analyzer uses infrared spectroscopy to measure 0.001–2000 mg/L with fast scanning. A dismountable optical system with electrical modulation and lock-in amplification improves signal clarity and cooling. Built-in storage with regression calculation completes tests in ~30 seconds.

Thumb

Avatar

0 repins 0 comments

Labtron Rotational Viscometer measures 100–13M mPa·s with 0.3–100 rpm speed using multiple spindles. It is equipped with a floor-standing design, metal lifter, and temperature probe. A 7-inch touchscreen displays shear stress and shear rate with data transfer and storage.

Thumb

Avatar

0 repins 0 comments

Labtron Fat Analyzer uses Soxhlet extraction for 6 samples (0.5–15 g) per batch. It has a metal heating module (RT+5–300 °C, ±1 °C) with five extraction methods. A 7-inch touch screen, ≥85% solvent recovery, ether leak detection, and water flow control enable safe operation.

Thumb

Avatar

0 repins 0 comments

Labtron Benchtop PH Meter Measures 0.00–14.00 pH with ±0.01 accuracy and 0.01 resolution. It supports 2-point auto calibration using USA/NIST buffers with automatic buffer recognition. Automatic or manual temperature compensation from 0–100 °C with a white backlit LCD shows pH and temperature.

Thumb

Avatar

0 repins 0 comments

Labtron Microbial ID & AST System handles 60 cards and delivers results within 8 h. It identifies microbes via colorimetry and detects MIC using turbidimetry.The system supports 200+ antibiotics with 9 dilutions, combo cards, MDR detection, and automated reporting.

Thumb

Avatar

0 repins 0 comments

Labtron Microbial ID & AST System handles 60 cards and delivers results within 8 h. It identifies microbes via colorimetry and detects MIC using turbidimetry.The system supports 200+ antibiotics with 9 dilutions, combo cards, MDR detection, and automated reporting.

Thumb

Avatar

0 repins 0 comments

Labtron Deionized Water System delivers 30 L/h output with flow up to 2 L/min from direct tap water input. It integrates RO, DI, UV, and ultrafiltration with 16–18.2 MΩ·cm resistivity and 97–99% ion rejection. Microcomputer control with auto RO flushing supports consistent lab workflows.

Thumb

Avatar

0 repins 0 comments

Labtron Genetic Analyzer employs capillary electrophoresis with 16 channels and 36–50 cm capillaries. It detects SNPs, CNVs, and single-base mutations from 20 ng DNA within 24 hours. Automated 96-well sample handling enables high-throughput genetic workflows.

Thumb

Avatar

0 repins 0 comments

Labtron Benchtop Ball Mill supports dry and wet milling with adjustable speed from 60–570 rpm. It processes soft to hard materials below 10 mm to achieve micron-level output. Compact design, low noise operation, and safety provisions support controlled small-batch grinding.

Thumb

Avatar

0 repins 0 comments

Labtron Automatic Potentiometric Titrator features an integrated burette valve and bright LCD display for clear operation. It measures pH 0–14, mV, and temperature with microprocessor control and adjustable stirring speed. Automatic and manual pH standard identification supports consistent titration results.

Thumb

Avatar

0 repins 0 comments

Labtron Graphite Kjeldahl Digester uses infrared heating with graphite conduction. It processes 20 tubes of 300 ml with PID temperature control from 5–450 °C. A color screen, insulation, anticorrosive pump, and safety protection support smooth operation.

Thumb

Avatar

0 repins 0 comments

Labtron Blood Bag Tube Sealer is a compact unit for sealing blood, infusion, and urine bags using a high-frequency sealing system. It supports tube diameters from 3 to 6 mm with a sealing time of 0.5 to 2 seconds. Uniform heating ensures firm, clean sealing while maintaining blood quality.

Thumb

Avatar

0 repins 0 comments

Labtron ducted fume hood is microprocessor-controlled with a centrifugal blower to remove toxic gases. It features an 820×670×730 mm interior, 520 mm opening, 850 mm work height, 0.3–0.8 m/s airflow, LED and 253.7 nm UV lamps, acid- and base-resistant surfaces, and an active carbon filter.

Thumb

Avatar

0 repins 0 comments

Labtron oil and grease analyzer is a tabletop unit with a dismountable optical system and electrical modulation source. It measures 0.001–2000 mg/L using an integrated optical and electrical setup. Built-in storage, auto reset, and regression calculation simplfies the analysis.

Thumb

Avatar

0 repins 0 comments

Labtron Flow Cytometer Analyzes physical and chemical cell characteristics using dual semiconductor lasers at 488 nm and 638 nm. An avalanche photodiode detector improves sensitivity and resolution across fluorescence channels. An integrated sampling pump supports accurate cytometric measurements.

Thumb

Avatar

0 repins 0 comments

Labtron Automated Media Dispensing system includes a main control unit, rotor, and carrousel holding up to 94 petri dishes. It supports 1 to 99 ml dispensing with fast calibration, stored programs, and high dispensing speed. A 5.7-inch touch screen enables simple operation.

Thumb

Avatar

0 repins 0 comments

Labtron Multi-Mode Microplate Reader Supports 6 to 384-well plates for absorbance, fluorescence, and luminescence detection. It features a xenon lamp, RT+4 °C to 45 °C temperature control, fast reading, and wide dynamic range. Suitable for medical, biological, and pharmaceutical research applications.

Thumb

Avatar

0 repins 0 comments

Labtron Fat Analyzer operates on the Soxhlet extraction principle for automated fat determination. It processes up to six samples per batch with a capacity of 0.5 to 15 g. The metal heating module enables rapid heating with low power consumption, while ether leak detection with water control ensures safe operation.

Thumb

Avatar

0 repins 0 comments

LabtronDigital Burette offers a volume range of 0.01 mL to 99.99 mL, supporting accurate dispensing for both small and large titrations. A high-quality motor and electronic control enable smooth, fatigue-free operation. The built-in magnetic stirrer ensures uniform mixing directly from reagent bottles.

Thumb

Avatar

0 repins 0 comments

Labtron Air Sterilizer provides a PM2.5 CADR of 500 m³/h for efficient indoor air purification. It combines an H13 HEPA filter with activated carbon to reduce fine particles, odors, and VOCs. Copper-silver ion framework with UVC support helps limit airborne microorganisms.

Thumb

Avatar

0 repins 0 comments

Labtron handheld XRF spectrometer applies energy dispersive X-ray fluorescence to detect elements from magnesium to uranium. It analyzes up to 40 elements with ppm to 99.99% range and fast results. The unit includes a 5-inch touchscreen, Bluetooth, GPS, and rechargeable battery for field analysis.

Thumb

Avatar

0 repins 0 comments

Labtron manual colony counter supports colony counts from 0 to 999 and petri dishes from 50 to 150 mm. It features 3–9× magnification, LED white light, and a 3-digit digital display. A pressure-sensitive pen enables cumulative marking and dual dish counting.

Thumb

Avatar

0 repins 0 comments

Labtron standard analytical balance delivers accurate weighing with 100 g / 600 g capacity, 0.001 g / 0.01 g resolution, and 0.004 g / 0.04 g minimum weighing. It features a load cell sensor, ≤3 s stabilization, LCD display, 110 mm pan, and sliding glass draft shield for stable measurements.

Thumb

Avatar

0 repins 0 comments

Next Page